Category Archives: NEWS

Eleanor Sweepstakes

Eaglemoss/Die-Cast Club has announced a sweepstakes promotion related to our Eleanor Mustang! One lucky winner will be flown to the Eleanor factory (Fusion Motors in California) for a tour, get to drive a real Eleanor, and meet Ms. Halicki herself. Fifteen second and third place winners will also receive prizes.

Be sure to enter before 11:59am EST May 12, 2021! You can find details at the link below:

Ride Aboard the Eleanor Mustang Sweepstakes

Shop is Open!

I have had many visitors ask about the tools and supplies that I use to build my partworks, so I have created a ‘Shop‘ over at my main build site with Amazon links to most of the items I have used along the way. All proceeds go towards supporting my site costs, not for profit. I hope you all find this helpful!

If you want to build this specific partwork, check out the Eaglemoss 1:8 scale Eleanor Mustang ordering page!

Free Gift #1

If you signed up for the subscription-based version of this Eaglemoss 1:8 scale Eleanor Mustang model build, you will receive five FREE gifts along the way. The first gift is this full-color 16″x26″ Poster. It is folded up in the shipping box, so the creases likely will keep it from being framed, but it could look nice on the wall of your build area!

The remaining gifts to arrive (at least in the USA) are:

  • Magazine Binder
  • Full-size Metal License Plate
  • Heated Travel Mug
  • Display Base

 

3-in-One Oil

If you are building any of the die-cast metal large scale models out there, you are probably familiar with the pain around driving screws into metal parts. In my experience, some of these screws have a tendency to bind up, strip threads, or simply snap off. Not only does it cause frustration, but it could cause a long delay in your build waiting for replacement parts.

For a while now, I have read about other builders that were using a little oil on their metal screw threads to help reduce the risk of damage and the effort needed to seat these screws fully. Up until this point, I had taken my time to carefully pre-thread metal screws, but it turns out they were on to something. I recently picked up some 3-in-One Multi-Purpose Oil (from the WD-40 Company) and it has changed everything!

I simply dip the tip of each metal screw into a tiny drop of this stuff and they go right in and without any drama. I should have done this sooner! If putting a little oil on the end of a metal screw is not feasible, you can also use a toothpick or other small tool to apply the oil directly into a screw hole before installing the screw.

I highly recommend grabbing a bottle of this oil (or other similar lubricant). It will surely save you time and headache!

I’m a baaaad man

“See ya tomorrow night, Eleanor, with your fine ass.” – Donny, Gone in Sixty Seconds

I am not typically interested in the classic Ford Mustangs, but both of the Eleanor fastbacks are beautiful machines.

This Eaglemoss 1:8 scale Mustang Eleanor is based on the hero car from the 2000 film Gone in Sixty Seconds starring Nicholas Cage. I signed up for this partwork back in April 2020 and it should start shipping in February 2021. We are almost there, so check back soon!